南陽市中和光學有限公司
Nanyang Zhonghe optical Co., Ltd
紅外材料
1. Germanium (Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength band. Its high refractive index makes Ge ideal for low power imaging systems because of minimum surface curvature. Chromatic aberration is small, often eliminating the need for correction.
1. Germanium (Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength band. Its high refractive index makes Ge ideal for low power imaging systems because of minimum surface curvature. Chromatic aberration is small, often eliminating the need for correction.
1. Germanium (Ge)
Germanium (Ge) is the preferred lens and window material for high performance infrared imaging systems in the 8–12 μm wavelength band. Its high refractive index makes Ge ideal for low power imaging systems because of minimum surface curvature. Chromatic aberration is small, often eliminating the need for correction.
| Crystallographic properties | |
| Syngony | Cubic |
| Crystal Form | Poly or Single Crystal |
| Lattice Constant | 5.66 |
| Cleavability | <111>, non-perfect |
| Molecular Weight | 72.6 |
| Physical properties | |
| Density, at 20 °C | 5.33 |
| Hardness, Mohs | 6.3 |
| Dielectric Constant for 9.37 × 109 Hz at 300 K | 16.6 |
| Melting | 937 |
| Thermal Conductivity, W/m·K at at 293 K | 59 |
| Thermal Expansion, 1/K at 298 K | 6.1 × 10-6 |
| Specific Heat Capacity, J/(kgK) at 273-373 K | 0.074 |
| Bandgap, eV | 0.67 |
| Knoop Hardness, kg/mm2 | 800 |
| Youngs Modulus, Gpa | 102.66 |
| Shear Modulus, GPa | 67.04 |
| Bulk Modulus, GPa | 77.86 |
| Debye Temperature, K | 370 |
| Poissons Ratio | 0.278 |
| Elastic Coefficient | C11=129, C12=48.3, C44=67.1 |
| Apparent Elastic Limit | 89.6 MPa (13000psi) |
| Chemical properties | |
| Solubility in water | None |
| Solubility in acids | Soluble |
| Molecular Weight | 72.59 |
2. Silicon (Si)
Silicon (Si) is grown by Czochralski pulling techniques (CZ) and contains some oxygen that causes an absorption band at 9 microns.To avoid this, material can be prepared by a Float-Zone (FZ) process. Optical silicon is generally lightly doped (5 to 40 ohm cm) for best transmission above 10 microns, and doping is usually boron (P-type) and phosphorus (N-type). After doping silicon has a further pass band: 30 to 100 microns which is effective only in very high resistivity uncompensated material.
CZ Silicon is commonly used as substrate material for infrared reflectors and windows in the 1.5-8 micron region. The strong absorption band at 9 microns makes it unsuitable for CO2 laser transmission applications, but it is frequently used for laser mirrors because of its high thermal conductivity and low density. Application as window, lens in the 1.5 - 8 um region; Mirror for CO2 laser and spectrometer applications.
| Crystallographic properties | |
| Syngony | Cubic |
| Lattice Constant, A | 5.43 |
| Physical properties | |
| Density | 2.33g/cm3 |
| Hardness, Mohs | 7 |
| Dielectric Constant for 9.37 x 109 Hz | 13 |
| Melting point, оС | 1414 |
| Thermal Conductivity, W/m·K at 313 K | 163 |
| Thermal Expansion, 1/K at 293 K | 2.6x10-6 |
| Specific Heat Capacity, J/(kg°C) | 712.8 |
| Bandgap, eV | 1.1 |
| Knoop Hardness, kg/mm2 | 1100 |
| Youngs Modulus, Gpa | 130.91 |
| Shear Modulus, GPan | 79.92 |
| Bulk Modulus, GPa | 101.97 |
| Debye Temperature, K | 640 |
| Poissons Ratio | 0.28 |
| Chemical properties | |
| Solubility in water | None |
| Molecular Weight | 28.09 |
3、ZnS material:
ZnS MultiSpectral Under intense heat and pressure, defects within the crystalline lattice are virtually eliminated, leaving a water-clear material with minimal scatter and high transmission characteristics from 0.4 to 12 microns. This material is particularly well suited for high-performance common aperture systems that must perform across a broad wavelength spectrum.
Specifications:
Material: ZnS MultiSpectral
Diameter Tolerance: --------------------- +0.0, -0.1mm
Thickness Tolerance: -------------------- ±0.1mm
Clear Aperture: ---------------------------->85%
Parallelism: -----------------------------------3 arc minute
Surface Quality: ----------------------------80-50 scratch and dig
Wavefront Distortion: -------------------- λ /2 per 25mm @633mm
Bevel: -----------------------------------------Protective (<0.2mm x 45° )
Coating: -------------------------------------- Optional （Uncoated, AR Coating, etc.）
4. ZnSe material
ZnSe is a preferred material for lenses, windows, output couplers and beam expanders for its low absorptivity at infrared wavelengths and its visible transmission. For high-power applications, it’s critical that the material bulk absorption and internal defect structure be carefully controlled, that minimum-damage polishing technology be employed, and the highest quality optical thin-film coatings are used. The material absorption is verified by CO2 laser vacuum calorimetry. Our quality assurance department provides testing and specific optics certification on request.
ZnSe is non-hygroscopic and chemically stable, unless treated with strong acids. It’s safe to use in most industrial field, and laboratory environments.
產品產地:
中國航運港口:
中國福州交付周期:
四周付款:
銀行電匯, 西聯付款
給我們發電子郵件：
電子郵箱：1733875476@qq.com
地址：
河南省南陽市高新技術產業開發區光電孵化園R座壹樓
聯系我們：
電話：+86 188 5079 3819
電話：+86 135 0390 9163
咨詢免費報價
如果您對我們的產品感興趣，想要知道更多的細節，請在這里留言，我們將盡快回復您。
